NS0-509 NetApp Certified Implementation Engineer - SAN - ONTAP
Get link
Facebook
X
Pinterest
Email
Other Apps
You have proven skills planning, implementing, integrating, and
troubleshooting ONTAP SAN, FC switched fabrics and Ethernet iSCSI/FCoE
solutions, and different operating systems (Windows, LINUX, ESX, UNIX) and
applications.
NCIE—SAN Specialist, ONTAP logos and certificates will be granted to those
individuals who successfully obtain NetApp Certified Data Administrator, ONTAP (NCDA
ONTAP) certification, then pass the NetApp Certified Implementation Engineer—SAN
(NS0-509) exam.
NCIE—SAN Specialist, E-Series logos and certificates will be granted to those
individuals who successfully pass the NetApp Certified Implementation
Engineer—SAN, E-Series (NS0-505) exam.
NetApp Certified Implementation Engineer – SAN, ONTAP (NS0-509) Note: These documents and the exam encompass ONTAP up to version 9.5.
• Industry/Product Knowledge
• Active IQ… But Wait, There’s More!
• Active IQ User Guide
• Best Practices for Scalable SAN – TR4080 v8
• Brocade SAN Health
• Brocade SAN Design and Best Practices Guides
• Config Adavisor V5.5
• Cluster Management Using OnCommand System Manager
• Cisco MDS 9000 Family NX-OS Interfaces Configuration Guide Release 6.2
• Cloud Manager and ONTAP Cloud Documentation
• Disks and Aggregates Power Guide
• Data Protection Power Guide
• Ethernet Storage Best Practices
• FlexArray Virtualization Implementation Guide for Third-Party Storage
• FC Configuration for ESXi® using VSC Express Guide
• FC Configuration for Red Hat Enterprise Linux Express Guide
• FC Configuration for Windows Express Guide
• FC SAN Optimized AFF Setup Guide
• High-Availability Configuration Guide
• Hardware Universe
• IMT FAQ
• iSCSI Configuration for ESXi using VSC Express Guide
• iSCSI Configuration for Red Hat Enterprise Linux Express Guide
• iSCSI Configuration for Windows Express Guide
• Implementing and Configuring Modern SANs with NVMe/FC TR-4684
• IMT FAQ
• Logical Storage Management Guide
• Linux Unified Host Utilities 7.1 Release Notes
• Linux® Unified Host Utilities 7.1. Installation Guide
• Network Management Guide
• NetApp Interoperability Matrix Tool
• NetApp Memory Accelerated Data ds-3953
• ONTAP 9 docs.netapp.com
• ONTAP 9 Protection Power Guide
• ONTAP 9 SAN Administration – Provisioning
• ONTAP 9 SAN Configuration – Provisioning
• ONTAP 9 FlexArray Virtualizatoin – FlexArray Virtualization Implementation for
Third-Party Storage
• ONTAP 9 FC Express Configuration for ESXi – Provisioning for SAN protocols
• ONTAP 9 Express FC Configuration for Red Hat Enterprise Linux – Provisioning
for SAN protocols
• ONTAP 9 Cluster Administration
• ONTAP 90 FC Configuration for Windows Express
• ONTAP 90 Logical Storage Management Guide
• Performance Management Power Guide
• Performance Monitoring Express Guide
• Planning your ONTAP Cloud configuration
• SnapCenter Software 4.1 Installation and Setup Guide
• System Administration Reference
• SAN Migration Using Foreign LUN Import
• SAN Administration Guide
• SAN Configuration Guide
• SAS Disk Shelves Installation and Cabling Guide For DS460C, DS224C, and DS212C
• T11 – Fiber Channel Interfaces
• TR-4684 Version 2.0: Implementing and Configuring Modern SANs with NVMe/FC
• TR-4476 - NetApp Data Compression, Deduplication and Data Compaction Data
• TR-4517 - ONTAP Select Product Architecture and Best Practices
• Upgrade Advisor in ActiveIQ
• Volume Move Express Guide
• Windows HUK Question: 1 An administrator has an AFF A200 cluster at their primary site that is used
for FC connectivity to
servers. For disaster recovery purposes they want to start replicating their
data to another AFF A3Q0
cluster In a secondary location. The AFF A300 is In a site that has no FC or
FCoE capable switches, and
is currently only used for CIFS dat
a. A cluster peering relationship already exists between the two clusters.
Which three additional actions are needed for the data to be ready for access
from hosts at the secondary site? (Choose three.)
A. Create zones with the appropriate initiators and targets for the secondary
site.
B. Enable the iSCSI service on the SVM at the secondary site.
C. Replicate the data from the primary site to the secondary site with
SnapMirror.
D. Create new iSCSI igroups for LUN mapping.
E. Enable the iSCSI service on the SVM at the primary site.
Answer: B, C, D
Question: 2 Referring to the exhibit, which type of zoning should be used?
A. a WWPN with a single initiator and multiple targets
B. a WWPN with a single initiator and a single target
C. a WWNN with a single initiator and multiple targets
D. a WWNN with a single Initiator and a single target
Answer: B
Question: 3 A customer has an AFF A200 with a LUN residing in a volume by Node 4. The
default Selection
Mapping settings are effect. During a planned takeover cluster test, Node 3
performs a take over of
Node 4.
Referring to the exhibit, what is the expected number of paths seen from the
host?
A. 6
B. 8
C. 4
D. 2
Answer: A
Question: 4 You have inherited a small FC SN infrastructure that consists of 15 servers
(hosts), two Cisco MDS
9148s switches, and a 4-node NetApp AFF A300 cluster. You suspect that your
predecessor did not
configure zoning according to best practices.
In this scenario, what information is necessary to audit your SAN zoning?
(Choose two.)
A. SVM WWNNs
B. SVN LIF WWPNs
C. Controller port WWPNs
D. Host GBA WWPNs
My excitement is immeasurable after getting guaranteed success with the help of NS0-509 dumps. I download this low-priced guide from Exam4Help with money back guarantee. I got to the point information from NS0-509 dumps questions and answers and had enough time to practice before the final exam. I think this smart guide should be everyone’s choice.
I was advised by an expert to use NS0-509 dumps for to the point preparation of my IT exam. Now I’m fully satisfied with my outstanding result. I’m thankful to that expert and to those experts who have designed NS0-509 exam study guide. I suggest to all students to download this guide from Realexamdumps.
Languages: English Audiences: IT professionals Technology: Microsoft 365 Skills measured This exam measures your ability to accomplish the technical tasks listed below. The percentages indicate the relative weight of each major topic area on the exam. The higher the percentage, the more questions you are likely to see on that content area on the exam. View video tutorials about the variety of question types on Microsoft exams. Do you have feedback about the relevance of the skills measured on this exam? Please send Microsoft your comments. All feedback will be reviewed and incorporated as appropriate while still maintaining the validity and reliability of the certification process. Note that Microsoft will not respond directly to your feedback. We appreciate your input in ensuring the quality of the Microsoft Certification program. If you have concerns about specific questions on this exam, please submit an exam challenge. If you have other questions or feedb...
Overview This exam is a qualifying exam for the Expert - SC Series track. This exam focuses on the knowledge and activities involved in installing, initializing, configuring, testing, updating, upgrading and troubleshoot the hardware and software of the Dell EMC SC Series Storage products. Dell EMC provides free practice tests to assess your knowledge in preparation for the exam. Practice tests allow you to become familiar with the topics and question types you will find on the proctored exam. Your results on a practice test offer one indication of how prepared you are for the proctored exam and can highlight topics on which you need to study and train further. A passing score on the practice test does not guarantee a passing score on the certification exam. Products Products likely to be referred to on this exam include but are not limited to: SC Series Storage DSM 2015, SCOS 6.X, the SC4020 and the SC8000 Exam Topics Topics likely to be covered on this exam inclu...
Citrix 1Y0-341 (CCP-N) Certification Exam Syllabus 1Y0-341 Dumps Questions, 1Y0-341 PDF, CCP-N Exam Questions PDF, Citrix 1Y0-341 Dumps Free, CCP-N Official Cert Guide PDFThe Citrix 1Y0-341 exam preparation guide is designed to provide candidates with necessary information about the CCP-N exam. It includes exam summary, sample questions, practice test, objectives and ways to interpret the exam objectives to enable candidates to assess the types of questions-answers that may be asked during the Citrix Certified Professional - Networking (CCP-N) exam. It is recommended for all the candidates to refer the 1Y0-341 objectives and sample questions provided in this preparation guide. The Citrix CCP-N certification is mainly targeted to the candidates who want to build their career in Networking domain and demonstrate their expertise. We suggest you to use practice exam listed in this cert guide to get used to with exam environment and identify the knowledge areas where you...
My excitement is immeasurable after getting guaranteed success with the help of NS0-509 dumps. I download this low-priced guide from Exam4Help with money back guarantee. I got to the point information from NS0-509 dumps questions and answers and had enough time to practice before the final exam. I think this smart guide should be everyone’s choice.
ReplyDeleteI was advised by an expert to use NS0-509 dumps for to the point preparation of my IT exam. Now I’m fully satisfied with my outstanding result. I’m thankful to that expert and to those experts who have designed NS0-509 exam study guide. I suggest to all students to download this guide from Realexamdumps.
ReplyDeleteNice blog! Really this was very useful blog for us. Nice sharing about Microsoft Certified Power Platform Fundamentals
ReplyDelete